Control panel
1 On/Off
Product is switched on or off.
2 Start/pause
Press the button to start or pause the drying cycle.
3 Specialty function
These buttons are used for setting additional functions.
4 Display
This display shows the setting, estimated remaining time and status
messages of your dryer.
5 Programmes
Different Dryer cycle can be selected according to the user's needs to
make the clothes have more effective drying result.
Display
OPERATIONS
Programme selector
1 Press the (On/Off) button. When the LED display screen brightens
up, rotate the programme knob to select the desired programme.
2 Select the (Delay), (Time), (Intensity), (Anti-Crease) or (Signal) func-
tions for additional option.
3 Press the (Start/Pause) key.
Programme start
The drum will keep rotating after the programme starts, the state light
in the display area will flash in sequence, the remaining time displayed
will change automatically.
Programme end
1 The drum will stop running after the programme ends, the display
will show "0.00", the state light of "End" and related light will illu-
minate. The dryer will start (Anti-crease) function if user doesn’t
remove the load in time (refer to page 15).
Please press (On/Off key to cut off power and pull the plug out.
2 Deal with the problems accroding to “Malfunction display and so-
lutions”, if there is a unexpected stop during the drying procedure
and the dryer show information (refer to page 18).
Specialty Functions
Instructions of the (Delay)function
This function is used for delaying clothes drying time within 24 hours.
The delay time means the programme will start after x hours. When the
delay programme starts, the time starts to decrease on the display and
the delay icon blinks.
Steps in details:
1 Load your laundry and make sure the machine door is closed.
2 Press the (On/Off) button, then to turn the programme selector
knob and select a desired programme.
3 You can select the (Anti-Crease) or (Signal) functions according to
your need
4 To press the (Delay) key.
5 Continue to press the (Delay) to select the delay time.
6 After the (Start/Pause) key is pushed, the Dryer is at the run condi-
tion. The drying procedure will be automatically performed when
the delay time is over.
7 If you push the (Start/Pause) button again, the delay function will
be paused. If you want to cancel the “Delay” function, please press
the (On/Off) button.
Instructions of the (Time) function
When the warm or cool or refresh programme is selected, the (Time)
button can be used to adjust the drying time in 10 min. steps.
Instructions of the (Intensity) function
Use for adjusting the dryness level of the laundry. The level has four
grades.
The drying time increases 3 minutes in every grade.
1 The intensity function can be activated only before the programme
start.
2 Press the (Intensity) button repeatedly to select the drying time.
3 Except the (Cotton Iron) (Delicate) (Synthetic Iron) (Wool) (Time),
all the other programmes can be set the (Intensity)function.
Instructions of the (Lamp) function
The lamp inside the drum will lighten about 3 minutes when the button
is pressed or 1 minute the door is opened.
Instructions of the (Signal) function
Set the buzzer on or off. In general condition, the buzzer is off. Please
touch it if needed.
When the buzzer is on:
1 The dryer will give the leading sound if press the extra function but-
tons.
Remaining Time indicator/Error message
Tank:Please empty the container when
the“indicator” is lighting, after the dryer
stops.
lyser, efter tørretumbleren er stoppet.
Delay start
Please clean the filter when the“Indicator”
is lighting, after the dryer stops.
Timer
Cycle phase status
Clean filter (warning)
Empty water container (warning)
Drum lamp indicator
Signal indicator
Anti-crease mode
My cycle
Dryness level (four grades)
Child lock
