Clean the
scrap threads
1. Open the door.
2. Take out the filter door.
3. Clean the filter door;
wipe off the scrap
threads accumulated
on the filter door.
4. Reinstall the filter door.
Clean filter base
1. Open the cover.
2. Unscrew both locking levers towards each other.
3. Clean the filter base completely.
4. Re-insert the filter base!
5. Screw both locking lev-
ers.
6. Close the cover until it
locks into position
A – Lock lver
B – Cover
C – Filter base
Note!
• The fluff accumulated on the filter will block the air circulation,
which will cause the extension of drying time and energy consump-
tion.
• Do disconnect the power cord befare cleaning !
• Do not operate the dryer without the filter!
•
Clean the filter atter each use to prevent lint accumulation inside
the dryer.
Clean heat exchanger
• As necessary, approx. once
every 2 months, remove
the fluff from the heat ex-
changer using the spange
or saft brush.
• When doing this, please use
gloves.
Wash air condenser
Leave the dryer to cool down .
Residual water may escape, place an absor-
bent cloth under the maintenance cover.
• Unlock the maintenance cover.
• Completely open maintenace cover.
• Screw both locking levers towards each
other.
• Pool out the air con dense r.
• Clean the air con denser completely,
drain thoroughly.
• Clean the seals.
• Re-insert the air con denser, handle at
the button !
• Unscrew both locking levers.
• Cloth the maintenance cover until it locks
into position. Please clean the air conden-
ser approx, once every 3 months it fre-
quently used.
• Do not damage the air con denser!
Warning!
Clean with water only; do not use hard/sharp-edged objects ! Do not
operate the dryer without the air condenser!
During drying, water may collect between the window and the seal, but
this does not affect the function of your dryer!
Trouble shooting
Dispiay
Reason
Solutions
“E32”
Humidity sensor error
Please contact your local
service center if the prob-
lem persists.
“E33”
Temperature sensor
error
Warning!
• Only authorised technicans can carry out repairs.
• Befare you call service, please check if you have dealt with the fault
yourself or if you have followed the user instructions.
• A technician will charge you for advice, even during the warranty
period.
