18
the interior stained with oil or oily food soup stains, should be
cleaned immediately to avoid the long contact with the liner
which may lead to the liner corrosion and cracking.
Storage of foods
Instructions for storing foods
• When storing freezing foods, put them to the inside of freez-
ing chamber, other than the bottle rack.
• Do not put bottled or canned foods into the freezing cham-
ber to prevent frost cracking.
• Before putting hot foods into the refrigerator, cool them to
room temperature first; otherwise, they will increase power
consumption.
• Mark the freezing date on the packaging bag according to
different storage lives of foods, so as to prevent foods from
exceeding the time limit.
• Divide foods into proper pieces and package them separate-
ly, which are easy to freeze thoroughly and will not frozen
together.
• The packaging materials shall be odorless, airtight, water-
tight and pollution-free, so packaged foods are not easy to
taint by other odor, without quality reduction.
• Do not put too many fresh foods into the freezing chamber
once, preferably not exceeding the freezing capacity value of
refrigerator.
• Melted foods can not be frozen again, unless they are made
into dishes; otherwise, their service quality will be affected.
• Glass bottles or glass containers shall not be placed into the
freezing chamber or at the air outlet of refrigerating cham-
ber duct; otherwise, they may explode.
• Foods can not block the air outlet; otherwise, abnormal air
circulation will be caused.
Energy saving tips
• Make sure to keep the refrigerator away from heat source
and direct sunlight.
• Before storing hot foods, cool them to room temperature
and then put into refrigerator.
• Close the door timely, reduce the opening frequency, and
shorten the opening time.
• When unfreezing frozen foods, you can put them into the re-
frigerating chamber, which will assist in refrigeration of the
refrigerating chamber.
• Make sure that the temperature sensor is not covered or
blocked by foods, and keep proper distance with foods.
Maintenance
This production has automatic defrosting function, without
manual operation.
Cleaning
Precautions for internal and external cleaning of refrigerator:
• Before cleaning, always turn off the power switch, discon-
nect the power plug.
• During cleaning, make sure that no water will enter the
switch, control panel, door lamp and top control box.
• Remove dirt from the outside of refrigerator with mild
cleaner, then wipe with clean soft cloth, and let the refriger-
ator dry naturally.
• When cleaning door sealing strip, always use clean water,
wipe with dry cloth and let it dry naturally. Wet soft cloth
with warm water or neutral cleaner to wipe the refrigerator
body except the door sealing strip.
• It is forbidden to flush the refrigerator directly with water,
which will affect electrical insulation properties, etc.
• It is forbidden to clean the refrigerator with metal wipers,
ware brushes, coarse abrasive cleaners, strong alkaline de-
tergents, or flammable or toxic cleaning fluids.
After cleaning, connect the power plug of refrigerator, and con-
nected with the refrigerator.
Ice maker install and uninstall
It is suggested to remove the ice maker, clean, and then install
when it is used for the first time or for a long time. Please power
off the refrigerator before removal.
Take out the ice storage box ,lift forcibly with both hands, and
then pull it out;
• Clean, dry and then install.
When installing the ice storage box , align the bottom with the
rails at both sides, put into the rails, and then push.
General information
On vacation
■
When you want to leave for vacation, you had better to
make the refrigerator operate continuously and leave foods
that can be stored for a short time. If you want to stop the
refrigerator, remove all foods, disconnect the power plug,
clean the inside of refrigerator fully, and open the door to
avoid producing abnormal odors.
■
When leaving for vacation, it is suggested to turn off the ice
maker switch, empty the ice storage box, close the water
valve, and stop using the ice maker function.
At power failure
■
Generally, short-term power failure will not affect the tem-
perature of the refrigerator sharply. However, if power fail-
ure lasts for a long time, you shall reduce the opening fre-
quency of refrigerator, and shall not put fresh foods into the
refrigerator (prevent rise in the temperature of refrigerator
from speeding up).
■
If you know power failure is coming, you can turn on the
“Super Frz.”
function in advance to keep the temperature of
refrigerator to the lowest value.
■
When power failure lasts for a long time, you need to take
out the ice storage box and discard to prevent ice cubes
from melting into water that will flow into other parts of the
freezing chamber.
Shutdown
■
Generally, it is not suggested to stop refrigerator or turn off
the power switch; otherwise, the life of refrigerator may be
affected.
If the ambient temperature is too low during shutdown, the
remaining water in the water system may be iced; in this
case, please contact technicians to come for emptying the
refrigerator.
Switch off the ice maker
■
If the ice maker function is not needed for a long time,
please switch off the ice maker temporarily;
Hint: This only disables the ice making function; the remain-
ing ice in the ice storage box can be taken still, and water
system operates normally.
■
Press
“ICE OFF”
button for 3s to switch off the ice maker,
then the
“ICE OFF”
icon is lighted.
Summary of Contents for SKF 618BS
Page 31: ...30 Abmessungen...