Scandomestic SKF 500, User Manual

Page: 18 / 19

18
Trouble shooting
Before calling for service, review this list.It may save you both
time and expense.This list includes common occurrences that are
not the result of defective workmanship or materials in this ap-
pliance.
No display on the Display panel
• The mains plug of the appliance is not in the socket properly.
• The fuse for the domestic supply Is switched off.
- Check whether the power is on;
- The fuse must be switched on.
Alarm sound
• Door is slightly open or not
• Close more than 1 minute.
- Close the door completely.
The compressor do not work
• Its under defrosting mode.
• Power is not connected well.
- Its normal for defrosting;
- Check whether the power is Connected well.
Compressor runs too long
• The fridge has recently been disconnected for a period of
time;
• Put too much fresh or hot food;
• Doors are opened too frequently or too long.
- It take some hours for the fridge to cool down completely;
- Hot food will cause the fridge to run longer until the desired
temperature is reached;
- Warm air entering the fridge cause it to run longer
- Open the door less often.
Vibrating noise
• Floor is uneven or weak;
• Items placed on the top of the fridge are vibrating;
• Fridge is touching wall or cabinets.
- Be sure floor is level and solid and can adequately support
fridge;
- Remove items;
- Move fridge so that does not touch the wall or cabinets;
Warning
This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental ca-
pabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance
in a safe way and understand the hazards involved.Children shall
not play with the appliance.
Cleaning and user maintenance shall not be made by children
without supervision.
The refrigerant isobutene(R600a) is contained within the refrig-
erant circuit of the appliance, a natural gas with a high level of
environmental compatibility, which is nevertheless flammable.
During transportation and installation of the appliance, ensure
that none of the components of the refrigerant circuit becomes
damaged.
The refrigerant (R600a) is flammable.
Caution:risk of fire
1 The appliance must be positioned so that the plug is acces-
sible.
2 If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
3 Keep ventilation openings, in the appliance enclosure or in
the built-in structure, clear of obstruction.
4 Do not use mechanical devices or other means to accelerate
the defrosting process, other than those recommended by
the manufacturer.
5 Do not damage the refrigerant circuit.
6 Do not use electrical appliances in side the food storage
compartments of the appliance, unless they are of the type
recommended by the manufacturer.
7 This unit is using R600a as the Refrigerant and cyclopent-
ance as Foaming agent, both of this two kind of materiral
is easy to be burnt, so the abandoned unit should be away
from the fire, and can not be treated with fire.
8 Danger of electrical shock, the yellow-green earthling of this
appliance must be earthed before operation.
9 Refrigerator discarded after the need for disposal according
to local lows and regulation.
10 WARNING-The refrigerant and insulation blowing gas are
flammable.When disposing of the appliance, do so only
at an authorized waste disposal centre. Don not eapose to
flame.
Recycling
This marking indicates that this product
should not be disposed with other house-
hold wastes throughout the EU. To prevent
possible harm to the envirment or human
health from uncontrolled waste disposal,
recycle it responsibly to promote the sus-
tainable resuse of material resources.
To return your used device, please use the
return and collection systems or contact the
retailer where the product was purchased.
They can take this product for envirmental safe recycling.