MSR120D Programmer’s Manual UDN PM009 Rev. E
Appendix A – Download Application 2005/2/23
Page A-2
4. Press
Auto Run
button to do firmware download automatically.
At this stage, the application will do actions sequentially as follows:
a. Enter boot mode, the application will auto detect reader’s communication port, baud rate, data bit, and parity
setting. As soon as reader gets into boot mode, the LED goes red flashing and beeps once.
b. Erase system program area and do blank check.
c. Start firmware download.
d. After successful download done, the reader beeps once.
Total 42 pages
