The microscope is
falling under its
own weight
If the microscope head is falling
down its own focus system, you
will need to adjust the focus
friction.
Adjust the focus friction – refer
Advanced instructions
If not, change the mounting
surface to a more appropriate one.
Check that the microscope is
securely clamped to a stable
horizontal surface
Use the optional Scan Optics SO-
291 table plate to stiffen a thin
mounting surface such as a sheet-
metal table or trolley.
Check that the appropriate friction
knobs have been set correctly
Refer
Arm assembly adjustments
$
!
The microscope is
not stable
Check if the microscope head is
seated correctly in the wrist joint.
Refer
Assembling the arm and
head
!
!