Setting Manual Exposure for the MiScope-MP2 digital microscope
The MiScope-MP2 usually defaults to automatic exposure control. You can change the settings so that you can manually
adjust the exposure by doing the following:
1)
Start the Video ToolBox Pro software.
2)
Once you see the live image from the MiScope-MP2, press the CONTRAST button to display the camera
Properties window. Click
the “
Camera Control
” tab.
3)
Locate the Expo
sure slider and uncheck the “Auto” box located on the right side.
The exposure is now set to manual. Slide the Exposure slider left or right to reduce or increase the exposure
level (image brightness). You will see the effects in the main image window behind the Properties window.
