!
!
1.
Remove the pillar, base and clamping plate from the case or carton.
2.
Insert the pillar into the hole in the base. Tighten the two grubscrews using the 5mm socket
key found in the tool kit to fix the pillar in place
3.
Remove the clamping plate from the case or carton and place it on the pillar. Tighten the two
grubscrews to fix the clamping plate in place.
4.
To fix the floor stand, screw the stop knobs down until the stops are resting evenly on the
floor.
5.
Screw the stop lock discs down on to the base to lock the stops.
6.
To unlock the floor stand, screw the stop locks back up, then unscrew the stop knobs until the
wheels can move freely.
