18
7. Display and fault messages
Display
Possible cause
Remedy
1. Max. CAPACITY
not equal to the one
marked on the
overlay
2. Every function
invalid
3. Measurement units
missed
CONFIG and USER parameters are not set
correctly
Reset CONFIG and USER parameters
according to the user calibration.
The weighing is not
accurate
1. An object is trapped between the load
cell and the bottom of the scale
2. Load cell was hit hard
1. Remove the object
2. Perform linearity calibration
3. Loosen the transport safety screws.
4. Place the load on the centre of the
weighing platform
