15
4. FRONT PANEL KEYS AND INDICATORS
4.1 FUNCTION OF THE KEYS
ZERO-B.L.
- It clears the displayed gross weight if it’s /- 2% of the total capacity.
- If pressed at length it allows the backlight set (see section 5.10).
TARE
- It executes the semiautomatic tare.
- If pressed at length it allows the modification of the gravity of calibration and use zones (see
section 6.2).
- A secondary function of selecting the value when setting a parameter or other functions.
C-On/Off
- Under weighing condition, it clears the
A
verage
P
iece
W
eight (
APW
).
- If pressed at length it turns on/off the scale.
- A secondary function of clearing the value when setting a parameter or other functions.
PCS
- It executes the
A
verage
P
iece
W
eight (
APW
) calculation (see section 5.5.1).
- Pressed in weighing phase together with the
5
key it access to the setting of the FILTER
(see section 6.5).
- Pressed at start-up, during self-checking, together with the
7
key, it access to the setting of
the number of divisions and zero tracking (see section 6.1).
- Pressed at start-up, during self-checking, together with the
8
key, it access to the calibration
with zero acquisition and capacity selection (see section 6.3).
M+
- It executes the accumulation (see section 5.6).
- A secondary function of confirming the value when setting parameters or other functions.
MC
- It clears the memorized accumulating data.
- If pressed at length it access to the calibration with no zero acquisition and no capacity
selection (see section 6.2).
0 … 9
- They allow the manual entry of the predetermined tare (see section 5.3.2) or the manual
entry of the
A
verage
P
iece
W
eight (
APW
) calculation (see section 5.5.2).
- Secondary function of numeric value insertion when setting a parameter or other functions.
