52
ACCUMULATION
TARE
The scale does not print
•
Another printout is already in progress (
busy
)
•
Make sure there is a roll in the printer
•
The printer does not switch on
•
The weight is unstable (
unStAb
)
•
The net or gross weight is negative or is insufficient for printing (
loW
)
•
Underload or overload (
______
o
------
) (
un.oVEr
)
•
The scale was not loaded after the last printing (
no.0.unS
)
•
You are trying to print a non-approved weight
The scale does not accumulate
•
Make sure there is a roll in the printer
•
The printer does not switch on
•
The weight is unstable (
unStAb
)
•
The net or gross weight is negative (
loW
)
•
Underload o overload (
______
o
------
) (
un.oVEr
)
•
The scale was not unloaded after the last printing (
no.0.unS
)
•
The weight is insufficient for weighing (
loW
)
- less than 10 divisions for the accumulator modes
- less than “Min” for the approved products (shown on the measuring plate)
The scale does not tare
•
The weight is unstable (
unStAb
)
•
The gross weight is negative (
loW
)
•
The weight is insufficient
•
The weight exceeds the maximum capacity
•
The tare function has been deactivated (see page 49)
•
In the event of manual tare, the value exceeds the maximum capacity
The sale has lost the total
•
Switching off the scale causes the accumulated totals to be lost
NU2-IPC20_50-E-0918
Summary of Contents for IPC20
