![background image](http://html1.mh-extra.com/html/scag-power-equipment/sfz61-30bs/sfz61-30bs_operators-manual_1205827024.webp)
20
R
Section 5
CONDITION
CAUSE
CURE
U N E v E N C U T O N F L AT
GROUND - WAvY HIGH-LOW
APPEARANCE, SCALLOPED
CUT, OR ROUGH CONTOUR
Width of Deck
SGB020
Lift worn from blade
Replace blade
Blade upside down
Mount with cutting edge toward ground
Deck plugged, grass accumulation
Clean underside of deck
Too much blade angle (deck pitch)
Adjust pitch and level
Deck mounted improperly
See your authorized SCAG dealer
Bent spindle area
See your authorized SCAG dealer
Dull blade
Sharpen blade
UNEvEN CUT ON UNEvEN
GROUND - WAvY APPEARANCE,
HIGH-LOW SCALLOPED CUT,
OR ROUGH CONTOUR
Width of Deck
SGB021
Uneven ground
May need to reduce ground speed, raise
cutting height, and/or change direction
of cut
SLOPING RIDGE ACROSS
WIDTH OF CUTTING PATH
Width of Deck
SGB023
Tire pressures not equal
Check and adjust tire pressure
Wheels uneven
Check and adjust tire pressure
Deck mounted incorrectly
See your authorized SCAG dealer
Deck not level side-to side
Check for level and correct
TROUBLESHOOTING CUTTING CONDITIONS (CONT'D)