background image

3

12. Install the hopper mounting brackets to the

outside of the frame on the rear of the machine.
See Figure 3-6.

FIGURE 3-6

13. Attach the hood assembly to the machine by

installing the mounting post into the hopper
mounting brackets.  Secure with the ring pins
and tighten the locking bolts.  See Figure 3-7.

FIGURE 3-7

14. Install the hose from the blower assembly

adapter to the hopper hood and secure using the
8-1/2" clamps.

15. Install the bag assemblies.

7. Install the blower assembly to the mounting

bracket and secure with the mounting pin.
See Figure 3-4.

8. Align the blower assembly with the discharge

opening of the cutter deck.  Tighten the
hardware for the mounting bracket.  See Figure
3-4.

9. Install the quick pin through the rear hole in the

discharge chute mounting bracket.  See Figure 3-
4.

FRONT SIDE
IDLER PULLEY

BACK SIDE
IDLER PULLEY

BLOWER
PULLEY

SPINDLE
PULLEY

10. Install the belt to the spindle pulley.  When

replacing the belt, see figure 3-5 below.

FIGURE 3-4

11. Install the new belt covers and secure.  See

items number 1 and number 21 on page 10 of the
Blower Mounting Components section in the
Illustrated Parts List for proper installation.

Figure 4 A GC-STT Install Art

Hopper
Mounting
Brackets

Rear Frame

Ring Pins

Ring Pins

Locking
Bolts

Locking
Bolts

FIGURE 3-5

16. Using the weight support bar as a guide, identify

the four corresponding mounting holes, and the
existing hardware that will need to be removed in
order to secure the weight support bar to the
front of the machine as shown. See Figure 3-8,
Page 4.

RIGHT SIDE OF 

CUTTER DECK SHOWN

(Note: Some parts not shown for viewing purposes.) 

2006 GC-STC-V install art 3

BLOWER 
ASSEMBLY

MOUNTING 
BRACKET

MOUNTING PIN

TIGHTEN MOUNTING
BRACKET HARDWARE

HAIR
PIN

QUICK
PIN

Summary of Contents for GC-STWC-61V





















Reviews: