background image

1

1.1 INTRODUCTION

This manual has been prepared to provide the
information you need to correctly assemble, operate,
and maintain this grass catcher. Read it carefully and
keep it for future reference.

The replacement of any part on this product by other
than the manufacturer's authorized replacement part
may adversely affect the performance, durability or
safety of this product.

USE OF OTHER THAN ORIGINAL SCAG
REPLACEMENT PARTS WILL VOID THE
WARRANTY.

If additional information or service is needed that is
not outlined in this manual, please contact your Scag
Power Equipment dealer.  Scag dealers are trained in
the latest service methods and carry a full line of Scag
replacement parts.

When ordering parts, always provide the complete
model and serial number of your catcher.

All information provided in this manual is based upon
information available at the time of printing.  Scag
Power Equipment reserves the right to make chages at
any time without notice or obligation.

2.1 SAFETY AND OPERATING

INSTRUCTIONS

-Note-

To avoid personal injury, it is imperative that all
safety instructions be observed.

1. Read this operator's manual and the

operator's manual that is supplied with the
machine this attachment is used on.

A replacement manual is available from your
authorized Scag Service Dealer or by contacting:
Scag Power Equipment, Service Department at P.O.
Box 152, Mayville, WI 53050.  Please indicate the
complete model and serial number of your Scag
product when ordering a replacement manual.

2. Never operate your mower without the complete

grass catcher, all guards and covers installed, or
the discharge chute  properly installed.

3. Before removing the grass bucket, disengage the

mower, stop the engine on both the mower and
the grass catcher, and wait for all movement to
stop.

4. ALWAYS turn the engine OFF, remove the key

and wait for all movement to stop before
servicing or cleaning the mower or the grass
catcher.

5. Do not modify or alter any component of the

grass catcher attachment.

6. Do not allow any passengers to ride on the grass

catcher attachment or on the mower.

7. To reduce the risk of fire, keep the engine clean

and free of debris, or excess lubricants.

8. DO NOT add fuel to a running or hot engine.

Turn the engine OFF and allow it to cool before
re-fueling.

1.2 DIRECTION REFERENCE

The "Right" and "Left", "Front" and "Rear" of the
machine are referenced from the normal operating
position.

1.3 SERVICING THE ENGINE

The detailed servicing of the engine is not covered in
this manual.  For service of the engine it is important to
contact your Scag Dealer or an authorized servicing
agent of the engine manufacturer.  Any unauthorized
work done on the engine will void the warranty.

Summary of Contents for GC-STT-6KH













Reviews: