Customer Helpline
1300 889 028
8
Assembly
4. CONNECTION OF INLET WATER HOSE
Note:
The inlet water filter (20) must always be fitted in the water inlet pipe to filter out
sand, lime stone and other impurities as these will damage the pump valves. (See B1)
Caution:
Failure to fit the filter will invalidate the guarantee.
Connect the inlet water hose with a standard quick coupling.
Screw the inlet water connector (6) tight on to the water inlet. (See B2)
6
6
A
C
B
8
9
20
A1
A2
B2
B1
C2
C1
D2
D1
F
E
G2
G1
C4
C3
H2
H1
5. ASSEMBLING THE HIGH PRESSURE HOSE
1) Make sure that ON/OFF switch is in OFF position. (See C1)
2) Insert the high-pressure hose to spray gun. (See C2)
3) Insert the high-pressure hose to outlet water connector. (See C2)
4) Push the lance into the trigger gun when inserted to the end turn it. Make sure the lance
is properly fixed to the gun. (See C3)
5) Attach the nozzles. When attaching the nozzle the button (A) on the nozzle should come
out again. Check before activating the trigger that the nozzle is properly fixed. (See C3)
4) Connect the high-pressure hose to the machine. (See C4)
NOTE: Before removing any accessories
,
make sure that ON/OFF switch is in OFF position.
1) Detach the high pressure hose by pressing the pawl (B) and button (C). (See C2)
2) Detach the extension lance by pushing it to the end and turn it. (See C3)
3) Detach the nozzle by pressing the button (A) on the nozzle. (See C3)
6
6
A
C
B
8
9
20
A1
A2
B2
B1
C2
C1
D2
D1
F
E
G2
G1
C4
C3
H2
H1