24
SBS-6500 User Manual
Storage Battery Systems, LLC.
2 ) Voltage Testing
Pressing the V/A
key enters the voltage testing mode on the SBS-6500. voltage,
current and temperature are measured simultaneously.
The default is AUTO ranging.
To change the range to manual ranging, press the
key and change ranges. Each
time the key is pressed it changes range (moving the decimal point one place each
time). Hold the range key for more than two seconds to return to auto ranging mode.
In
measurement mode voltage, current and temperature can be measured
simultaneously. Auto hold and auto recording are both available in V/A measurement
mode. (auto hold – auto record mode)
3) Current
Current measurement is a subsidiary measurement function in the voltage measurement
mode which always set to manual ranging. Use of an optional current clamp is required to
measure current.
[CT Range selection]
Pressing
key, allows you to select the external clamp range (CT measurement :
DC 40A/400A connect with external DC current adapter). After selecting the type, press
the encoder (center rotator key) to complete the setting.
[Voltage Measurement]
