SBL LED FL-350, User Manual, Page: 8 / 10

DMX operation
Setting the DMX starting address
For operation with a controller with DMX512 protocol, the device is equipped with 6 control channels. To be
able to operate the device with a DMX controller, the DMX starting address must be set for the first DMX
channel. The starting address depends upon which DMX controller is being used. Please refer to the
controller’s documentation.
1 Press the
MODE
button so many times until
A001
is indicated in the display. Confirm with the
ENTER
button.
2 The red LED above the display will blink when DMX signals are being received. If no control signals are
available, the red LED above the display will not blink.
Note: Please make sure that you do not have any overlapping channels in order to control each device
correctly and independently from any other fixture on the DMX chain. If several devices are addressed
similarly, they will work synchronically.
Functions in DMX mode
Channel: Value: Function:
1
Colors
000 - 015 White
016 – 039 White + Red
040 – 063 Red
064 – 087 Red + Green
088 - 111 Green
112 - 135 Green + Yellow
136 - 159 Yellow
160 - 183 Blue
184 - 207 Blue
208 - 231 Blue + Orange
232 - 255 Orange
2
CTB / CMY
000 – 050 Open
051 – 101 4500K CTB
102 – 152 Cyan
153 – 203 Magenta
204 – 255 Yellow
3 000 - 255 Iris
4
000 - 255 Dimmer with increasing brightness
5
Strobe
000 - 000 No function
001 - 127 Strobe-Effect with increasing speed
128 - 159 Pulse-Effect – fade out - with increasing speed
160 - 191 Pulse-Effect – fade in - with increasing speed
192 - 255 Random Effect
6
Reset
000 - 199 No function
200 - 239 Reset
240 - 255 No function