OPERATION
After you connected the effect to the mains, the light starts running. The power switch is on the right side of
the panel.
During the reset of 30 seconds, the motors are trimmed and the device is ready for use afterwards.
Via the
Lamp ON/OFF
switch you can turn the LED on and off.
The
strobe fader
controls three different strobe effects: Up to 50% of the fader path controls
strobe speed
,
from 50% to 75% of the fader is
pulse effect
and from 75% to 100% is
random mode
.
Half-tones
can be created by pressing the desired adjoining color buttons simultaneously.
Please note:
white and red can not produce a half-tone.
Focusing
Step 1:
Loosen the focus button on the side of the device.
Step 2:
Adjust the focus by sliding the lens housing forward or backward.
Step 3:
Tighten the focus button.
Zooming
Step 1:
Loosen the zoom button on the side of the device.
Step 2:
Set the desired beam angle (7° - 13°).
Step 3:
Tighten the focus button.
Control Board
The Control Board offers several features: you can easily set the starting address or execute a reset.
Enter the menu by pressing the MODE-button. Browse through the menu by
pressing UP or DOWN. Press ENTER in order to select the desired menu. You
can change the selection by pressing UP or DOWN. Press ENTER in order to
confirm. You can leave every mode by pressing MODE. The functions provided
are described in the following sections.
Menu structure
Mode
Setting
Function
A001
001 - 511
Set starting address
REST
ON / OFF
Execute reset