Last update:
2017/01/14 22:59
en:ost:ccds:setup https://polaris.astro.physik.uni-potsdam.de/wiki/doku.php?id=en:ost:ccds:setup&rev=1484431176
https://polaris.astro.physik.uni-potsdam.de/wiki/
Printed on 2021/10/25 11:07
1. Cover of the STF-8300
2. Backplate of the filter wheel
mounted to the SFT-8300 (the
red circles mark the
corresponding screws, the
blue circle marks the sensor
for the filter wheel position)
3. Filter holder with filters and
spacer rings
4. Filter wheel with inserted
filter holder (the red circles
mark the screws that attach
the cover to the filter holder,
the blue circles mark the
screws that attach the filter
holder to the backplate of the
filter wheel)
5. Filter wheel with the cover
7. Filter wheel with the OAG
and T2 adapter
8. Side view of the STF-8300
9. STF-8300 with filter wheel,
OAG, and ST-i
ST-8/7
Assembling the filter wheel
The goal of this task is to mount or dismount the filter wheel to the ST-7 of ST-8. The operation is
demonstrated by the following pictures of the ST-8. The procedure in short:
open the camera by loosing the screws from the cover, see Figure 1.
1.
open the case of the filter wheel and mount the empty cover of the filter wheel to the CCD, see
2.
Figure 2.
now attach the filter wheel and the case of the adaptive optics module (AO), see Figure 3.
3.
