ELLIPSE2 AHRS & INS
– Hardware Manual
ELLIPSE2HM.1.3
5.5.2. ANT-ACM-G5ANT-1A196MNS-1
This GNSS L1/L2 antenna is especially selected to be compliant with
Ellipse-D requirements in both terms of signal tracking and small
size / weight.
This antenna provides GPS L1/L2 tracking as well as GLONASS and
BEIDOU and GALLILEO.
This antenna should be used with a ground plane for optimal
performance.
5.5.2.1. Performance specifications
Parameter
Specification
LNA Gain
> 32dB
Noise figure
< 3dB
Power consumption
50 mA
Antenna gain at zenith
(100mm ground plane)
GPS L1, Galileo E1, E2: 3.2 dBic
GPS L2, Beidou B2: 3 dBic
GLONASS L1: 3.6 dB
GLONASS L2, Galileo E6, Beidou B3: 2.3 dBic
Dimensions
Square: 50.8 mm
Height: 20.45mm
Cable length, type, Connector
5m, RG316B, SMA
Weight
105g (w/o cable)
200g (w cable)
Environmental
-55 to +85°C
Hermetically sealed
5.5.2.2. Mechanical drawing
49/50
Figure 5.15: Antcom G5 antenna mechanical layout. dimensions are in inches [mm]
Figure 5.14 : Antcom G5 antenna
陕西威瑞仪器仪表有限公司 主营全球知名：气象环境智能交通仪器、安防消防警用军用设备
TEL:029-88186182 WEB:www.go1go.com EMAIL:[email protected]
