ELLIPSE2 AHRS & INS
– Hardware Manual
ELLIPSE2HM.1.3
2.2. Electrical specifications
The Ellipse connectors are all placed on the front panel. The connectors are referenced and identified by
laser marking on the enclosure.
SBG Systems has selected high quality connectors designed for harsh environments. They offer an IP-68
protection when the plug is properly mounted.
Note: The Ellipse development kit cables are not designed to offer an IP-68 protection. Contact SBG
Systems to get further support about IP-68 protection.
2.2.1. Ellipse-A without GPS aiding
2.2.2. Ellipse-E with external aiding only
2.2.3. Ellipse-N with embedded GNSS
27/50
Figure 2.20: Ellipse INS without GPS (E version)
Figure 2.21: Ellipse INS with GNSS receiver (N version)
Figure 2.19: Ellipse AHRS
External aiding
connector
Main
connector
GNSS antenna
connector
Main
connector
Main
connector
陕西威瑞仪器仪表有限公司 主营全球知名：气象环境智能交通仪器、安防消防警用军用设备
TEL:029-88186182 WEB:www.go1go.com EMAIL:[email protected]
