SBC SBC373, Owner'S Manual

Page: 27 / 59

26
PBX Mode
If you are using a PBX (Private Branch Exchange) telephone system , you m ay be
required to dial an external access code, such as [8] or [9], prior to reaching an outside
line. Follow the steps below and enter that code in the PBX PREFIX field. This code
will then be added to all stored numbers upon dialing.
Press [MENU].
Using [▼ ] / [▲ ] to access “PBX MODE”.
Press [O.K.] to enter into the selection.
Using [▼ ] / [▲ ] to select “L1 PBX Prefix” or “L2 PBX
Prefix”.
Enter the code using numeric keys “0 - 9”.
Press [SAVE] to confirm , and then press [EXIT] to
return to stand-by.
Note: The phone will autom atically screen all Pre-dial numbers prior to dialing if PBX
Prefix is set. Enter the access code and the phone num ber you wish to dial, the
phone will autom atically insert a ‘pause’ after the first digit when dialing the num ber.
On the contrary, if the first digit is not the access code, the system will classify it as an
internal call and dial the displayed number only.
New Call Lamp
The Message W aiting Indicator / New Call Lamp will flash when there is new or
unread Caller ID in call log if the lamp is switched on.
Press [MENU].
Using
[▼ ] / [▲ ]
to
access “NEW CALL LAMP”.
Press [O.K.] to enter into the selection.
Using
[▼ ] / [▲ ]
to
switch the New Call Lam p ON or
OFF.
Press [SAVE] to confirm , and then press [EXIT] to
return to stand-by.
PBX MODE
O.K. EXIT
L1 PBX PREFIX:
_
EXIT
SAVE
NEW CALL LAMP
O.K. EXIT
NEW CL LAMP IS OFF
EXIT
SAVE
ME N U S E T T IN GS