SBC 2652, User Manual

Page: 34 / 48

34
CALLS LOG
HANDSET SETTINGS
RANGE EXTENDER
ANNOUNCE CID
RECORD NEW
REVIEW
SELECT TYPE
NUMBER
NAME
NUMBER AND NAME
OFF
NO YES
RECORD
ANNOUNCE CID ?
Advanced Operations
Name and Number Announce Caller ID is an advanced feature that enables your
telephone to announce the name or telephone number of callers before you answer
the call. Announcements are made from the Base Unit speaker. You must subscribe
to Caller ID service in order to use this feature.
Name and Number announcements are recorded in your own voice. You can record
up to 50 Name and Number announcements (one for each entry in your Phonebook
directory). Each Name and Number announcement can be up to 3 seconds long. Please
refer to the steps below to setup Name and Number Announce.
NOTE: If an inbound call has the Caller ID information blocked, and Name and
Number Announce is enabled, the Base Unit will announce PRIVATE CALLER. If
an inbound call has the Caller ID information out of area, and Name and Number
Announce is enabled, the Base Unit will announce UNKNOWN CALLER.
Setup Name and Number Announce
• In the idle (OFF) mode, press MENU and use
the scroll keys to select ANNOUNCE CID, then
press OK.
• Use the scroll keys to select SELECT TYPE,
then press OK.
• Use the scroll keys to select one of the four
options: OFF, NUMBER, NAME, NUMBER
AND NAME, then press OK.
• OFF: Select this option to disable Name and
Number announce.
• NUMBER: Select this option to enable Name
and Number announce of received telephone
numbers only.
• NAME: Select this option to enable Name and
Number announce of recorded Name and
Number announcements only.
• NAME AND NUMBER: Select this option to
enable Name and Number announce of
telephone numbers (for calls received that
don’t match an entry in your phonebook), or
Name and Number announce of recorded
Name and Number announcements.
Record a New Name and Number
Announcement
From New Phonebook Entry:
•
Follow the steps in To Store a Number/Name
(Page 20).
• After the ENTRY HAS BEEN STORED message
is displayed, you will then be prompted to
RECORD ANNOUNCE CID?
• If you choose NO, the entry will be stored without
a name and number announcement.
• Choose YES to record a name and number
announcement.
Name and Number Announce Caller ID