12
Enter Base ID Code
1.
After charging the Handset,
remove it from its Charge Cradle,
the screen will display:
2.
Press NEW, then enter the 15
digit Base Unit ID code, located
on the underside of the Base
Unit.
3.
Press OK. The Handset will
display: PLEASE WAIT!!
4.
Wait approximately 15 seconds.
The Handset will display:
FOUND BASE
If the Handset displays:
SYSTEM IS BUSY PLEASE TRY
LATER, this indicates that the
system is in use. Wait until the
Base Unit is in the idle (on
hook) mode, and repeat steps
2 through 4.
Congratulations! You can now enjoy
the benefits of your multi-Handset
system.
Registration and Operation
NO BASE
SUBSCRIPTION
Getting Started
Summary of Contents for 2652
Page 47: ...91 005520 030 000 ISSUE 0 ...
