Sayo Innova DBC Series, Manual

Page: 3 / 8

Before Installation
MANUAL MANUAL
2 3
Warning! Please wear gloves during operation, and be
careful with the edge of the sink to avoid scratching.
Please follow your regional pipeline and building standards.
Do not power on before a water filling test.
Do shut off cold/hot water supply.
Please unpack the product before installation and check whether it has been damaged.
The box inside includes the items as follows:
1
2
3
4
Intelligent and ultrasonic sink body
Intelligent driver
Electric Power Cable
Strainer
Name
1
1
1
1
Quantity
Exclusive for the intelligent driver
Exclusive for the Intelligent
and ultrasonic sink
Remarks
Check water supply and drainage pipeline. If needed, please change the pipeline.
All data in this manual are provided according to the latest product data before its
publication
.
Tools Recommended
Safety glasses Cross screwdriver Tapemeasure
Drilling saw or
saber-toothed saw
Pencil Gloves
Drill Jigsaw
Innova DBC
Innova DBC
Product Specification
Model Rated Power
Voltage
Dimension
(mm)
Template cutting
size (mm)
350W
350W
220V/50HZ
220V/50HZ
850x460
520x460
820x430
490x430
Installation Instruction
1. Hole cut-out
Mark it out in a position with a proper distance from the cabinet by referring to technical
parameters in this manual, as shown in Figure (1).
Use a drill machine to form an opening on the table, as shown in Figure (2).
Put the sink in the opening to check whether the opening is appropriate; if the size of the
opening is suitable, please clean up the dust and sundries on the table and put it aside.
Figure (1) Marking out on the kitchen board Figure (2) Opening with a drill tool
2. Strainer Installation
There are two different type of strainer for the Intelligent and ultrasonic sink, one is Remote
control strainer, the other is non-remote control strainer. . Installation methods of both types
of drainers are the same. For specific structures of them, please see Figure (3).