Sayo Innova DBC Series, Manual

Page: 6 / 8

MANUAL MANUAL
8 9
Direction for Use
1. Operation method and steps
Check: Whether the strainer for the Intelligent & ultrasonic sink is in a state of water storage;
Whether the intelligent driver of the sink is electrified.
Turn on the tap to inject at least 1/3 water of the sink; for the specific amount of water, it
depends on the number of items to be cleaned.
Please do not start the Intelligent
& ultrasonic sink when there is no
water in it.
1/3
Note: For dirt that is difficult to remove, please dip it for a
while before cleaning to achieve a better effect; or, you can
put it in warm water.
Figure (8) Minimum Water Level Requirement and Suggestions
Put items to be cleaned in the Intelligent & ultrasonic sink , and the objects should be in
contact with water; please do not stack them, as stacking may affect the cleaning effect.
Start the Intelligent & ultrasonic sink by an operation panel.
The layout of the operation panel is shown in Figure (9) below.
” ”
Indication
Power
” ”
Indication
Seafood
” ”
Indication
Fruits & vegetables
” ”
Indication
Cutlery
” ”
Indication
MEAT
” ”
Touch-
sensing
Power ” ”
Touch-
sensing
Seafood ” ”
Touch-
sensing
Fruits & vegetables ” ”
Touch-
sensing
Cutlery ” ”
Touch-
sensing
MEAT
Indication area:
If the light of an indication
area goes on, it indicates
t h a t t h e c o r r e s p o n d i n g
function button has been
initiated
Touch-screen area:
It is for touch control and
initiating the corresponding
function button
Figure (9) Schematic Diagram of Operation Panel
How to use the Intelligent & ultrasonic sink funtion through the operation panel?
Refer Figure (10).
1) Turn on "Power": Keep pressing the "Power" sensing position for 1 second to turn on the
power, and the light of the "Power" indication area on the operation panel is on.
2) To start a function : After the light of the "Power" indication area is on, touch a function
button according to the object to be cleaned, and the corresponding indication area lights
up; in this case, other function buttons in addition to the "Power" button are locked and have
no response to any touch, and the cleaning starts.
3) Stop Cleaning: If you need to stop the cleaning in this process, please touch the corresponding
function button again so that the corresponding indication area darkens and the cleaning
is discontinued. After one minute, the sink will be shut off automatically.
1) Turn on "Power"
4) End of cleaning: After the completion of cleaning, the corresponding indication area
automatically darkens, and you can touch the "Power" button to power off; or, wait for 1
minute until the sink’s power is shut off automatically.
2) To start a function
3) Stop Cleaning 4) End of cleaning
Cautions
In order to protect you and your family from being injured or financial losses, please
read the following details carefully before using the water tank, to ensure correct and
safe operation.
Power socket of intelligent & ultrasonic sink must be reliably grounded.
Only the voltage indicated on the apparatus is applicable to the intelligent & ultrasonic sink,
and please makes sure that the voltage conforms to relevant safety standards.