Saykey Key-fob, User Manual

Page: 6 / 8

‐ 6 ‐
4) If key ‐ fob detects any controller started network learn mode, it implement copy controller procedure and LED indicator
light on for 3 seconds after copy successful; If key ‐ fob has not detects any device in 60 seconds, exit copy controller
process and LED indicator goes off.
[Note:] Key ‐ fob keeps the associated device in association control groups (#2~#4) after copy device to a new controller..
[Note:] Press and hold on key for 2 seconds before step 3) would terminal copy device procedure.
„
Add key ‐ fob to other Z ‐ Wave network
1) Set the master controller into the add device mode (refer to main controller’s operating manual).
2) Press and hold both and key together for 2 seconds until LED indicator light on, release all key;
3) Press and hold key for 2 seconds until LED indicator intermittently flash (light on 3 times in 3 second), key ‐ fob
starts controller learn mode for include to the master controller as a secondary controller;
4) During inclusion, LED indicator intermittently flash until inclusion process complete, LED light on 3 second notice inclusion
is successful. After inclusion successful, key ‐ fob stays in wakeup state for 30 second in order to receive initial wakeup
configuration from the master controller. Key ‐ fob stays in inclusion process around 60 seconds, if there not any controller
was detected.
[Note:] Key ‐ fob’s learn mode is only available as it has not added any device before or has included in master controller already.
Key ‐ fob always ignores Basic Set/Get command requires from other controller.
[Note:] Press and hold on key for 2 seconds after step 3) would terminal procedure if Z ‐ Wave adding processing has not
started.
„
Remove key ‐ fob from other Z ‐ Wave network
1) Set the master controller into the exclusion device mode (refer to main controller’s operating manual).
2) Press and hold both and key together for 2 seconds until LED indicator light on, release all key;
3) Press and hold key for 2 seconds until LED indicator light intermittently flash three times, key ‐ fob starts
controller learn mode for exclude from the master controller;
4) During exclusion, LED indicator intermittently flash until exclusion process complete, LED light on 3 second notice
inclusion is successful. Key ‐ fob stays in exclusion process around 15 seconds, if there not any controller was detected.
[Note:] Key ‐ fob’s learn mode is only available as it has not added any device before or has included in master controller already.
„
Create associate device to association group of #2~#4 together locally
1) Press and hold both and key together for 2 seconds until LED indicator light on, release all key;
2) Press key 3 times in 2 seconds, LED indicator blink on 1 time interval 3 second (0.5 second on, 3 second off),
key ‐ fob starts associate device processing;