manualshive.com logo in svg

Savin 8025e, Operating Instructions Manual

Share
Download
Savin 8025e Operating Instructions Manual Download Page 14

6

❖

Scanned Files Status

1.

Date/Time

Displays the time and date transmission
was specified by this machine or the time
and date when Done, Error, or Cancelled
was confirmed.

2.

Transmission function icon

Displays the icon of the transmission
function used.

3.

Destination

Displays the transmission destination.
If you have selected multiple destina-
tions, the first selected destination is dis-
played.
Other destinations appear as “+ X”. (X in-
dicates the number of destinations.)

4.

Sender

Displays the sender name.

5.

File Name

Displays the stored file name of files that
are simultaneously sent and stored, or of
stored files that are sent.

6.

Status

Displays one of the following transmis-
sion statuses: Done, Sending..., Wait-
ing..., Error, or Cancelled.

7.

[

Cancel

]

To cancel transmission, select a file
whose status is 

[

Waiting...

]

, and then press

[

Cancel

]

.

8.

[

Print

]

Press to print transmission results.

Note

❒

Depending on security settings, some transmission results might not be dis-
played.

ARQ004S

Summary of Contents for 8025e

































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands