manualshive.com logo in svg

Savin 8025e, Operating Instructions Manual

Share
Download
Savin 8025e Operating Instructions Manual Download Page 12

4

Display Panel

This section explains the two confirmation displays - Check Modes and Scanned
Files Status.
You can find explanations about the E-mail screen, Scan to Folder screen, List of
Stored Files screen, or Network Delivery Scanner screen in this manual. For de-
tails, see "E-mail Screen", "Scan to Folder Screen", "List of Stored Files", and "Net-
work Delivery Scanner Screen".

Reference

p.13 “E-mail Screen”
p.39 “Scan to Folder Screen”
p.66 “List of Stored Files”
p.82 “Network Delivery Scanner Screen”

Confirmation Displays

This section explains the two confirmation displays - Check Modes and Scanned
Files Status.

Check Modes

This section explains items that are displayed and how to display the Check
Modes screen.
Use the Check Modes screen to check scanning and transmission settings.
Pressing the 

{

Check Modes

}

 key switches the screen from the initial scanner

screen to the Check Modes screen.

ARQ005S

Summary of Contents for 8025e

































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands