manualshive.com logo in svg

Savin 8025e, Operating Instructions Manual

Share
Download
Savin 8025e Operating Instructions Manual Download Page 13

5

❖

Check Modes

1.

[

Prev.

]

Press to return the initial scanner screen.

2.

Transmission function icon

Displays the icon of the transmission
function in use.

3.

Sender and Destinations list

Displays the sender and transmission or
delivery destinations list.
Use 

[

U

Prev.

]

 or 

[

T

Next

]

 to scroll through

the list.

4.

Number of destinations

Displays the number of specified destina-
tions.

Scanned Files Status

This section explains items that are displayed and how to display the Scanned
Files Status screen.
Use the Scanned Files Status screen to check e-mail transmission, Scan to Folder,
and delivery results.
Press 

[

Scanned Files Status

]

 to display the Scanned Files Status screen.

Up to 5 transmission or delivery results are displayed at the same time. Press

[

U

Prev.

]

 or 

[

T

Next

]

 to switch between results.

ARQ003S

Summary of Contents for 8025e

































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands