Saveo Scan SAVEO-RV2-RCCD, User Manual

Page: 22 / 140

** Enter Setup
Exit Setup 10
Image Stabilization Timeout : The engine waits for the image stabilization timeout to expire before
activating a decode session every time it detects a change in ambient illumination. This parameter is
programmable in 0.1s increments from 0.0s to 25.5s.
Example: Set the Image Stabilization Timeout to 5s
1. Scan the Enter Setup barcode.
2. Scan the Image Stabilization Timeout barcode.
3. Scan the numeric barcodes
“
5
”
and
“
0
”
. (See the Digit Barcodes section in Appendix)
4. Scan the Save barcode. (See the Save/Cancel Barcodes section in Appendix)
5. Scan the Exit Setup barcode.
Image Stabilization Timeout