Saveo Scan SAVEO-RV2-RCCD User Manual Download Page 112

Page: 112 / 140

** Enter Setup

Exit Setup

100

Check Digit Verification

Check digits are optional for Plessey and can be added as the last one or two digits, which are calculated

values used to verify the integrity of the data.

Disable

: The engine transmits Plessey barcodes as is.

Do Not Transmit Check Digit After Verification

: The engine checks the integrity of all Plessey

barcodes to verify that the data complies with the check digit algorithm. Barcodes passing the checks will

be transmitted except the last two digits, whereas those failing them will not be transmitted.

Transmit Check Digit After Verification

: The engine checks the integrity of all Plessey barcodes to

verify that the data complies with the check digit algorithm. Barcodes passing the checks will be

transmitted, whereas those failing them will not be transmitted.

Disable

** Do Not Transmit Check Digit After Verification

Transmit Check Digit After Verification

Summary of Contents for SAVEO-RV2-RCCD













































































































































Search results

Summary of Contents for SAVEO-RV2-RCCD

Reviews:

Related manuals for SAVEO-RV2-RCCD

Brands by name

Popular brands

Saveo Scan SAVEO-RV2-RCCD, User Manual

Search results

Summary of Contents for SAVEO-RV2-RCCD

Reviews:

Related manuals for SAVEO-RV2-RCCD

Brands by name

Popular brands