Saveo Scan SAVEO-RV2-RCCD User Manual Download Page 20

Page: 20 / 140

** Enter Setup

Exit Setup

Timeout between Decodes (Same Barcode)

can avoid undesired rereading of same barcode in a given

period of time. This parameter sets the timeout between decodes for same barcode. It is programmable

in 0.1s increments from 0.1s to 25.5s. The default timeout is 3.0s. If the parameter is set to 0, the timeout

between decodes (same barcode) is infinite.

Note

: This parameter is only valid when the

Disallow Rereading Same Barcode

is enabled.

Timeout between Decodes (Same Barcode)

Allow Rereading Same Barcode

: The engine is allowed to re-read same barcode, ignoring the timeout

between decodes (same barcode).

Disallow Rereading Same Barcode

: The engine is not allowed to re-read same barcode before the

timeout between decodes (same barcode) expires.

Allow Rereading Same Barcode

** Disallow Rereading Same Barcode

Example: Set the timeout between decodes (same barcode) to 5s

Scan

the

Enter Setup

barcode.

Scan

the

Timeout between Decodes (Same Barcode)

barcode.

Scan the numeric barcodes

“

”

and

“

”

. (See the

Digit Barcodes

section in Appendix)

Scan

the

Save

barcode. (See the

Save/Cancel Barcodes

section in Appendix)

Scan

the

Exit Setup

barcode.

Summary of Contents for SAVEO-RV2-RCCD













































































































































Search results

Summary of Contents for SAVEO-RV2-RCCD

Reviews:

Related manuals for SAVEO-RV2-RCCD

Brands by name

Popular brands

Saveo Scan SAVEO-RV2-RCCD, User Manual

Search results

Summary of Contents for SAVEO-RV2-RCCD

Reviews:

Related manuals for SAVEO-RV2-RCCD

Brands by name

Popular brands