Savch S2800 Series, User Manual

Page: 80 / 112

77
Feedback broken line detection value
Setting range 0.0~100.0[%]
10-09
Factory setting
0.0
Feedback broken line detection value: this test value corresponds to full scale (100%). The
system keeps detecting the feedback quantity of PID. When the feedback value is smaller
than or equal to the feedback broken line detection value, the system begins the detection
timing. When the detection time exceeds feedback broken line detection time, the system
will report the PID feedback broken line error (PIDE).
Feedback broken line detection time
Setting range 0.0~60.0[s]
10-10
Factory setting
1.0
set quantity
limited deviation feedback quantity
output frequency
time
time
Corresponding relationship between limited deviation and output frequency
When dormancy frequency is not 0, dormancy function start is enabled
When inverter internal PID operation frequency is lower than dormancy frequency, inverter
start dormancy will delay to timing, when the timing is finished, inverter stop output, and go
into dormancy statement. Internal PID controller will keep operating. When PID operation
frequency is up to awakening frequency, the inverter start awakening delay to timing; when
timing is finished, inverter will start to operate again.
Note: When you use it, please set awakening frequency to be higher than dormancy
frequency.
Dormancy frequency
Setting range 0.00Hz~00-03 (Max frequency)
10-11
Factory setting
0.00
Dormancy delay time
Setting range 0.0~5000.0s
10-12
Factory setting
0.0
Awakening frequency
Setting range 0.00Hz~00-03 (Max frequency)
10-13
Factory setting
0.00
Awakening delay time
Setting range 0.0~100.0s
10-14 Factory setting
0.0