Savch S2800 Series, User Manual

Page: 55 / 112

52
4 Input Terminal Parameters
This parameter is used to set functions corresponding digital multi-function input terminal.
0: No function
1: Forward running (FWD)
2: Reverse running (REV)
When terminal control determines operation command channel, the inverter operation command
is set by terminal function above.
3: Three line operation control
For the three-line control input terminals.Please see 04-05 three line function code introduction.
4: Forward jog-on
5: Reverse jog-on
For the details of jog-on frequency and acceleration and deceleration time.please see
09-02~09-04
6: Coast to stop
Function List
Setting value Function Setting value Function
0 No function 13
Multi-steps speed terminal 2
1 Forward operation 14
2
Reverse operation
15
Acceleration and deceleration
time selection
3
Three-line operation control
16
PID control pause
4 Forward jog-on
17
Wobble frequency pause ( on
the current frequency)
5
Reverse jog-on 18
Wobble frequency resett (back to
center frequency)
6
Coast to stop
19
Acceleration and deceleration
inhibition
7
Fault reset
20
Torque control inhibition
8
External fault input
21
Temporary clearance on frequency
increase and decrease setting
9
Frequency setting increase (UP)
22
Stopping DC braking 10
Frequency setting decrease (DOWN)
23
Reserved
11
Setting clearance of frequency
Increase and decrease
24
Reserved 12 Multi-steps speed terminal 1
25
Multi-steps speed terminal 3
Multi-steps speed terminal 4
MI6 terminal function selection
Setting range 0~25
04-05
Factory setting
MI3 terminal function selection
04-02
Factory setting 7
0
Reserved
Reserved 04-06
04-07
Factory setting
Factory setting
0
0
MI2 terminal function selection
04-01 Factory setting
MI1 terminal function selection
04-00 Factory setting
1
4
MI4 terminal function selection 04-03
Factory setting 0
MI5 terminal function selection
04-04
Factory setting 0