21
Part No. 000686, 01-m06-2011
Roby Owner’s Manual
6. OPERATION
Assembling the Steering Bar Post
1
Insert the post (Figure 10/a) at the u-hooks onto the circular cross-member
(Figure 10/b) on the base.
Figure 10
a
b
2
Incline the steering bar post (Figure 10/a) as shown by the arrow (Figure
10/b) until it locks into the base.
3
Once the steering bar is locked (Figure 11/a), push the red plastic safety
protective cover down onto the post release lever (Figure 11/b).
WARNING
Ensure that the Roby safety protective cover is in its
proper position. In this configuration, the electrical
contact outlet is engaged and the steering bar is locked in
the work position. If the safety protective cover is not in
its proper position, the Roby does not run.