Savaria Roby Owner'S Manual Download Page 2 | Manualshive

Page: 2 / 50

Savaria Roby Owner'S Manual Download Page 2

2

Roby Owner’s Manual

Part No. 000686, 01-m06-2011

IMPORTANT

Ensure that only an authorized Savaria DEALER services the Roby Powered Stair
Climber. Under no circumstances is anyone other than a Dealer with Savaria
training and authorization to adjust, service or modify any mechanical or
electrical device on this machine. Failure to follow this warning can result in
safety system compromises or defeat; this can result in serious injury or death.
Savaria Corporation accepts no liability for property damage, warranty claims
or personal injury, including death, in this circumstance.

Passenger safety is the result of countless details in the machine’s design and
manufacture. Reliable operation and continual safe operation requires regular
inspection and maintenance as outlined in this manual, or more frequently
where usage, environment, or local jurisdiction requires. As the Owner, you are
responsible for ensuring that regular inspections and maintenance occur in a
timely manner.

Refer to this manual for component description, setup, operating instructions,
and maintenance of the Roby Powered Stair Climber.

The dealer must provide you with the following information and ensure it is
recorded in this manual. In addition, either the dealer or yourself must keep any
service and/or maintenance records in the Maintenance Record section of this
manual.

WARRANTY

Ensure your Savaria Dealer provides you with a copy of the manufacturer’s
limited parts warranty and documentation relating to any Dealer labour
warranty.

-------------------------------------------------------------------------------------------------

FOR OWNER’S RECORDS

Customer Name: _________________________________________

Installing Dealer: _________________________________________

Dealer’s Telephone Number: _______________________________

Date Installed: ___________________________________________

Serial/Job Number: _______________________________________

«
1
2
3
4
...
»

Summary of Contents for Roby



















































Reviews:

No comments