background image

20

OMEGA Owner’s Manual

Part No. 000825, 03-m12-2013

5. TROUBLESHOOTING

For safety reasons, the lift is equipped with several electrical and mechanical 
locking devices. The lift will not work if any of these devices is tripped or if the 
order of events is incorrect. 

Only qualified technicians are authorized to perform 
repairs and 6-month maintenance. DO NOT manipulate, 
modify or remove any safety feature of the lift. Contact 
your authorized dealer as necessary. 

Follow through the items below to determine a possible reason for the problem 
before contacting your authorized dealer. 

1

If you’re having a problem with a call station, note the following:

When the controls at one call station are activated, all other call 
stations are automatically deactivated. The lift can only be controlled 
by one control at a time.

The platform must be folded up for the call station controls to function.

Check that the key switch (if equipped) on the call station is turned on.

2

If the lift will not move, check the following:

Check that the main power switch on the external control box is 
turned on. Turn on the platform key switch and make sure the green 
lamp on the platform turns on.

Check that there are no blown fuses in the building power distribution 
box.

Check that all emergency STOP buttons are released.

Check for obstacles underneath the access ramps and platform.

If the problem persists, contact your authorized dealer for assistance.

WARNING

Summary of Contents for omega

























Reviews: