14
OMEGA Owner’s Manual
Part No. 000825, 03-m12-2013
Operation
1
Make sure the pendant control is
plugged into the jack located on the
side wall of the carriage body (see
Figure 6). If not, unscrew the cap and
plug it in.
2
Turn on the main power switch on the
external control box.
Note that when
the main power switch is turned off, you
cannot run the lift using any of the
controls.
3
If the lift is not at the desired landing, you
can call the lift using the call station
controls (Figure 7 shows a call station for
an automatic platform).
Note that the call
station controls will only control the lift
when the platform is folded up.
4
To call the lift, first insert the key into the
call station key switch (if equipped) and
turn it on.
5
Press and hold either the
UP
or
DOWN
button to move the lift towards you.
NOTE:
Make sure you can see the lift at
all times when it is moving; stop it
immediately if there is an obstacle in the
way.
6
The lift will stop automatically at the
desired landing.
In the event that the lift does not stop after releasing the control button, you
can turn off the call station key switch (if equipped) to stop travel.
7
Press and hold the
UNFOLD
button on the call station to lower the platform
and raise the safety arm. The access ramp will lower automatically. Be
careful of the moving parts.
8
If using the folding seat, fold down the seat.
9
Turn off and remove the key from the call station key switch (if equipped).
Figure 6
PENDANT JACK
DOWN
UP
Figure 7
FOLD
UNFOLD
KEY SWITCH
(OPTIONAL)
