Savant IP Audio Deployment Guide
Copyright © 2020 Savant Systems, LLC
009-1571-03 | 200224
19 of 39
5.4. AVB Speaker Grouping
If there is more than one AVB Audio endpoints in the same User zone, Blueprint will generate service path options that group them and use them as
a single audio service. Below is an example of an IP Audio Soundbar and a Sub-Woofer attached to the analog output of a PAV-SIPA125SM.
Family Room
Cable TV
IR
Control Ports
DIGITAL AUDIO OUT (Digital Optical)
HDMI OUT (HDMI)
Outputs
Savant Host
SIPA125SM
IR (Serial PWM) Output 1
Control Ports
Digital Audio In 1 (Digital Optical)
Audio Input 3
Assigned Inputs
AVB_A Ethernet Port (AVB (A))
Data
GPIO 1
Audio Output 5
Assigned Outputs
Stereo Out 5 (Stereo RCA)
PoE AVB Switch
Assigned Data
Port 1
AVB_B Ethernet Port (PoE +) (AVB (B))
Port 2
AVB_B Ethernet Port (PoE +) (AVB (B))
IP Soundbar
RS-232 1
Control Ports
Data
AVB_A Ethernet Port (AVB (A))
HD TV
Control Ports
Inputs
HDMI IN (HDMI)
RS232C IN
Nano Sub
Control Ports
Inputs
Line In
Line In (Analog Minijack(1/8))
Trigger
IMPORTANT INFO!
The above example shows the analog audio output of a PAV-SIPA125SM used in a speaker group. The analog output of a
PAV-SIPA50SM cannot be used in AVB Speaker Grouping.