TB_US-BA-e-2020
5
The 'cdxx' material relationship is as follows:
3. The Plus key 4-6 or the Minus key 4-9 is pressed to select the material code for
measuring. Then the material selection key 4-5 is pressed to confirm. The
measuring instrument changes to the measuring mode, '0' appears in the
display. If a material code is selected without confirming this selection, the
instrument will automatically return to the measuring mode after a few seconds.
In this case, the meter will still retain the old material code before switching off
completely.
4. A
4-digit
number
is
shown
on
the
display:
When the plus key 4-6 is pressed, it displays 'cd11' or when the minus key 3-9
is pressed, it displays 'cd01'. The 4-digit number represents the last sound
velocity
defined
by
the
user.
By changing the speed of sound, varying material properties can be
compensated.
5. Once the material code has been selected and stored, it is stored in the
instrument memory. As long as no change is made, the meter always uses this
material code.
6. To enter the material code selection menu, press the selection button 3-5. To
leave the menu again, press the selection button 3-5 again or wait until the
device - after a few seconds - returns to the measuring mode and the display
shows '0'.
No
.
Code
Material
1
2
3
4
5
6
7
8
9
10
11
12
cd01
cd02
cd03
cd04
cd05
cd06
cd07
cd08
cd09
cd10
cd11
xxxx
Steel
Cast Iron
Aluminium
Copper
Brass
Zinc
Quartz glass
Polyethylene
PVC
Grey cast iron
Ductile Cast Iron
Sound velocity
