4
TB_US-BA-e-2020
4.
Description of the control panel
TB 200-0.1 US
TB 200-0.1 US-red
5.
Material selection
1. Switch on the device with the power button 4-4.
2. Select the material to be tested by pressing the material selection button 4-5.
The
display
4-2
will
show
the
code
'cdxx'
or
'xxxxx'.
'cd' is the abbreviation for code and 'xxx' is a number between 01 and 11, which,
in the table below, stands for the material to be measured. `xxxx` is a 4-digit
number indicating the sound velocity for the material selected by the user.
4-1 Sensor plug
4-2 Display
4-3 mm/inch Button
4-4 On and Off Button
4-5 Material selection button
4-6 Plus key
4-7 Ultrasonic measuring head
4-8 Calibration key (adjustment)
4-9 Minus key
4-10 Battery compartment
4-11 Display "Measuring process is
running
4-12 Zero plate
4-13 Speed selection button (only for TB
200-0.1 US)
4-1
4-7
4-6
4-2
4-4
4-3
4-2
4-3
4-4
4-5
4-5
4-1
4-6
4-7
4-8
4-8
4-9
4-9
4-10
4-10
4-11
4-11
4-12
4-12
4-13
