SD-BA-e-2121
5
SET:
Press once: Upper limit [HidT]. Press to change it: ▲ or ▼ (see 2.3)
Press once: Lower limit value [LodT]. Press to change it: ▲ or ▼(see 2.3)
Press once: Lower limit value to activate the memory function at
Peak value measurements (peak). [LE.SET / Lo Pe]. See also section 2.7.
Minimum limit function To change: ▲ or ▼ (Only in "Peak Mode")
activated) (see 2.7.)
Press once: Auto-Off function, switch off when not in use after
Adjustable time interval in seconds [P.OFF]. To change: ▲ or ▼
(Only activated in battery mode)
PEAK:
(peak value)
Assignment with three functions:
- continuous measurement
- Peak (peak value recording)
- Auto-Peak, like Peak function, but without minimum limit function
(see section 2.6)
MEMORY:
(memory function)
Saves the peak values for calculating the average of the measurement results (see
section - Saving)
Hi dT
Lo dT
LE.SET
P.OFF
F
R.PE
