Measure all around the sauna to ensure the measurement of the
bands are consistent.
Secure band in same manner as previous step.
Snug up bands with the cordless drill.
Make sure ends of sauna are flush.
Use the rubber mallet to tap the staves out & in as needed to get
the last wall stave and top stave to sit properly together.
Tap up (from the inside of the sauna so you don’t break the ends)
or down, by hammering on the band to attain a uniform circle
shape.
When the wall staves take on the proper
shape, tighten the steel bands a little more snug.
Continue to use the rubber mallet to finesse the staves into place
until they look just about perfect.
Cedar
Barrel Sauna Assembly Instructions