115
1
13.10
Measurements
→
Power of burner
Enter the value of the thermal power
calculated manually by the operator.
The thermal capacity can be
calculated by entering a flow rate
value or by reading the volumetric
counter (only for gaseous fuels).
The option is only displayed in
METER test mode, available for
gaseous fuels. It is possible to
adjust the number of seconds that
elapse between the reading of the
initial volume of gas and the final
volume. The minimum time required
by the standard is 120 secs.
KEY
FUNCTION
Enables the displayed interactive operations.
Selects a line; the selected line is highlighted in red. In edit mode,
set the desired value.
In edit, move the cursor to the box of the digit to be entered to form the value to be
entered.
Also activates the interactive function visible on the left side of the screen.
Return to the previous page.
In edit mode, cancel the modification carried out.
CONTEXT KEY
FUNCTION
Enters edit mode for the selected data.
OK
Confirm the data entered.
Goes to the next phase of the measurement.
o
Saves the measured value in the selected memory of the "Select Memory" menu.
Cancels the measurement.
15/01/14
10:00
Power of
burner
Mode
Type
Test duration
measurement
meter
120
15/01/14
10:00
Power of
burner
Mode
manual
