å
Refer to the enlarged diagram to identify the parts on the
HINGES and HINGE BRACKETS.
å
The DOORS may need some adjustments. Follow the text
below to make needed adjustments.
å
DOOR ADJUSTMENTS:
å
To adjust the DOORS from side to side (horizontal), loosen the
mounting screw several turns, then turn the adjusting screw in
or out. Tighten the mounting screw after making adjustments.
å
To adjust the DOORS up and down (vertical), loosen both
screws that fasten the HINGE BRACKETS to the END. Move the
DOORS up or down to the desired location. Tighten the screws
after making adjustments.
å
To adjust the DOORS in or out (depth), loosen the mounting
screw one turn and move the DOORS in or out, as needed.
Tighten the mounting screw after making adjustments.
Step 13
404975
www.sauder.com/services
Page 17
Adjusting screw (horizontal)
Mounting screw (depth)
(vertical adjustment)
