å
IMPORTANT: Your Hutch must be attached to the 404944
Credenza as indicated in Steps 9 and 10.
å
Remove the Keyboard Drawer from the Credenza. To do so, push
the black lever in and pull the Slide from the Rail.
å
Carefully position the Hutch on top of the Credenza. Fasten the
BACKS (J and K) to the back edge of the Credenza Top. Use
twelve BLACK 9/16" LARGE HEAD SCREWS (DD).
å
NOTE: You will need to make the four holes in the bottom surface
of the Credenza Top into through holes. Use a little extra force to
turn a BLACK 1-7/8" FLAT HEAD SCREW (BB) through the holes
in the Credenza Top to break through the surface. Then, pull the
SCREW out of each hole to clean the hole of debris.
å
Fasten the UPRIGHTS (C and D) to the Credenza Top. Use four
BLACK 1-7/8" FLAT HEAD SCREWS (DD).
Step 9
404975
www.sauder.com/services
Page 13
BLACK 9/16" LARGE HEAD SCREW
(12 used for the BACKS)
DD
BLACK 1-7/8" FLAT HEAD SCREW
(4 used for the UPRIGHTS)
BB
J
K
C
D
404944 Cr
edenza T
op
404944
Credenza
