Step 8
å
Carefully turn your unit over onto its front edges. Unfold the
BACKS (J and K) and lay them over your unit.
å
Make equal margins along the top and both side edges of
the BACKS (J and K). Push on opposite corners of your unit if
needed to make it "square".
å
Fasten the BACKS (J and K) to your unit using the NAILS (FF).
å
NOTE: Be sure to tap NAILS into the holes that line up over
the SHELVES (H and I) and UPRIGHTS (C, D, and E).
å
NOTE: Perforations have been provided for access through
the BACK. Carefully cut out the holes needed.
404975
www.sauder.com/services
Page 12
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
Unfi
nished
sur
face
NAIL
(53 used in this step)
FF
J
K
Unfi
nished
sur
face
The screw holes along the
bottom edge of the BACK will
be used when attaching the
HUTCH to the CREDENZA.
These holes must line up
over the SHELVES (H and I)
and UPRIGHTS (C, D, and E).
The top edges of the
BACKS must be even with
the top surface of the TOP.
Notched edge
