Step 26
å
Insert the drawers, keyboard shelf, and sliding shelf into the 109843 Executive Desk and 109848 Return Kit. You may refer
to step 21 of the 109843 instruction book.
å
NOTE: You have the option of attaching the keyboard shelf from either the 109843 or 109848 to the 109872.
å
Insert the GROMMET (10P) into the large hole in the TOP (E2). Then, insert the GROMMET CAP (1P) into the GROMMET.
å
Insert HOLE PLUGS (W) into any visible unused holes in any one of the units.
å
When moving the units, we recommend you separate the units from each other, move them to the new destination, and
then attach.
å
NOTE: Please read the back pages of the instruction booklet for important safety information.
å
This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.
109872
www.sauder.com/services
Page 30
CAUTION
: This Sauder unit has been designed
for the weight limits shown in this step.
Exceeding these limits could cause excessive
"sagging" of the part. Extreme overloading could
cause failure of the part and possible injury.
100 lbs.
40 lbs.
See the 109848
instruction book
for the Return Kit
weight limits.
See the 109843
instruction book for
the Executive Desk
weight limits.
E2
10P
1P
W
And to celebrate, why not share your success story?
Small drawer
Large drawer
Large drawer
Keyboard Shelf
and Sliding Shelf
