background image

Step 23

109872

www.sauder.com/services

Page 27

 

å

Fasten the BOTTOM (H) to the OUTER END (A) and INNER END (B). Use four BLACK 1-7/8" FLAT HEAD SCREWS (X).

 

å

NOTE: Be sure the FEET (R) are facing up.

 

å

Next, fasten the support bracket (from the 109848 Return Kit) to the TOP (E2) and MODESTY PANEL (F). Use three 
BLACK 9/16" LARGE HEAD SCREWS (from the 109848 Return Kit).

 

å

NOTE: The longer arm of the bracket should be fastened to the MODESTY PANEL. Use one pre-drilled hole in the TOP 
and two pre-drilled holes in the MODESTY PANEL.

 

å

Now, fi nish fastening the support bracket to the TOP (E2) and MODESTY PANEL (F). There are three remaining holes in 
the bracket. Turn three BLACK 9/16" LARGE HEAD SCREWS (from the 109848 Return Kit) through these holes and into 
the TOP and MODESTY PANEL.

 

å

NOTE: There are no pre-drilled holes for these three SCREWS. Use fi rm pressure to get them started.

BLACK 1-7/8" FLAT HEAD SCREW

(4 used for the BOTTOM)

X

BLACK 9/16" LARGE HEAD SCREW

(6 used from the 109848 Return Kit for 

the BRACKET from the Return Kit)

SUPPORT BRACKET

(from the 109848 Return Kit)

R

R

H

F

E2

B

A

Return Kit on the LEFT

Summary of Contents for Heritage Hill 109872









































Reviews: